HTS heading 7219 · Chapter 72
HTS 7219: Flat-rolled products of stainless steel, of a width of…
HTS heading 7219 covers flat-rolled products of stainless steel, of a width of 600 mm or more. It has 14 tariff lines with a duty rate; the general (MFN) rates are Free (14 lines).
Imports may also owe Chapter 99 tariffs (Section 232, 301 or 201) depending on origin and date, plus the Merchandise Processing Fee and, by sea, the Harbor Maintenance Fee.
Rates from the 2026 HTS Revision 22, effective October 30, 2026. Source: U.S. International Trade Commission.
Tariff lines and duty rates
| HTS code | Description | General | Special | Column 2 | Estimate |
|---|---|---|---|---|---|
| Not further worked than hot-rolled, in coils: | |||||
| 7219.11.00 | Of a thickness exceeding 10 mm | Free | 29% | ||
| 7219.11.00.30 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.11.00.60 | Of a width exceeding 1575 mm[kg] | Estimate → | |||
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 29% | ||
| 7219.12.00.02 | Not annealed or not pickled[kg] | Estimate → | |||
| Other: | |||||
| 7219.12.00.06 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Of a width of 1370 mm or more: | |||||
| Of a thickness exceeding 6.8 mm: | |||||
| 7219.12.00.21 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.12.00.26 | Of a width exceeding 1575 mm[kg] | Estimate → | |||
| Other: | |||||
| 7219.12.00.51 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.12.00.56 | Of a width exceeding 1575 mm[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.12.00.71 | Other[kg] | Estimate → | |||
| 7219.12.00.81 | Other[kg] | Estimate → | |||
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% | ||
| 7219.13.00.02 | Not annealed or not pickled[kg] | Estimate → | |||
| Other: | |||||
| 7219.13.00.31 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel: | |||||
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.13.00.71 | Other[kg] | Estimate → | |||
| 7219.13.00.81 | Other[kg] | Estimate → | |||
| 7219.14.00 | Of a thickness of less than 3 mm | Free | 29% | ||
| 7219.14.00.30 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| Other: | |||||
| 7219.14.00.65 | Of high-nickel alloy steel[kg] | Estimate → | |||
| 7219.14.00.90 | Other[kg] | Estimate → | |||
| Not further worked than hot-rolled, not in coils: | |||||
| 7219.21.00 | Of a thickness exceeding 10 mm | Free | 29% | ||
| 7219.21.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| 7219.21.00.20 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.21.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm[kg] | Estimate → | |||
| 7219.21.00.60 | Of a width exceeding 1880 mm[kg] | Estimate → | |||
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 29% | ||
| 7219.22.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| Containing more than 1.5 percent but less than 5 percent by weight of molybdenum: | |||||
| 7219.22.00.15 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.22.00.20 | Of a width exceeding 1575 mm but not exceeding 1880 mm[kg] | Estimate → | |||
| 7219.22.00.25 | Of a width exceeding 1880 mm[kg] | Estimate → | |||
| Other: | |||||
| 7219.22.00.35 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.22.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm[kg] | Estimate → | |||
| 7219.22.00.45 | Of a width exceeding 1880 mm[kg] | Estimate → | |||
| Other: | |||||
| 7219.22.00.70 | Of a width not exceeding 1575 mm[kg] | Estimate → | |||
| 7219.22.00.75 | Of a width exceeding 1575 mm but not exceeding 1880 mm[kg] | Estimate → | |||
| 7219.22.00.80 | Of a width exceeding 1880 mm[kg] | Estimate → | |||
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% | ||
| 7219.23.00.30 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| 7219.23.00.60 | Other[kg] | Estimate → | |||
| 7219.24.00 | Of a thickness of less than 3 mm | Free | 29% | ||
| 7219.24.00.30 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| 7219.24.00.60 | Other[kg] | Estimate → | |||
| Not further worked than cold-rolled (cold-reduced): | |||||
| 7219.31.00 | Of a thickness of 4.75 mm or more | Free | 29% | ||
| 7219.31.00.10 | In coils[kg] | Estimate → | |||
| 7219.31.00.50 | Not in coils[kg] | Estimate → | |||
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% | ||
| In coils: | |||||
| Of a width of 1370 mm or more: | |||||
| 7219.32.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel[kg] | Estimate → | |||
| 7219.32.00.25 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.32.00.35 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.32.00.38 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7219.32.00.44 | Other[kg] | Estimate → | |||
| Not in coils: | |||||
| 7219.32.00.45 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| 7219.32.00.60 | Other[kg] | Estimate → | |||
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | 29% | ||
| In coils: | |||||
| Of a width of 1370 mm or more: | |||||
| 7219.33.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel[kg] | Estimate → | |||
| 7219.33.00.25 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.33.00.35 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.33.00.38 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7219.33.00.44 | Other[kg] | Estimate → | |||
| Not in coils: | |||||
| 7219.33.00.45 | Of a width of 1370 mm or more[kg] | Estimate → | |||
| Other: | |||||
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel[kg] | Estimate → | |||
| 7219.33.00.80 | Other[kg] | Estimate → | |||
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | 29% | ||
| In coils: | |||||
| 7219.34.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.34.00.25 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7219.34.00.35 | Other[kg] | Estimate → | |||
| 7219.34.00.50 | Not in coils[kg] | Estimate → | |||
| 7219.35.00 | Of a thickness of less than 0.5 mm | Free | 29% | ||
| In coils: | |||||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel: | |||||
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.35.00.15 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7219.35.00.35 | Other[kg] | Estimate → | |||
| 7219.35.00.50 | Not in coils[kg] | Estimate → | |||
| 7219.90.00 | Other | Free | 29% | ||
| 7219.90.00.10 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7219.90.00.25 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7219.90.00.80 | Other[kg] | Estimate → |
90 lines shown. Statistical suffixes (the last two digits) inherit the rate of the 8-digit subheading above them.
Example: base duty and fees on $10000
For HTS 7219.11.00 at the general rate of Free, shipped by ocean, before any Chapter 99 tariffs:
| Base duty (Free) | $0.00 |
| Merchandise Processing Fee (0.3464%, min $34.58) | $34.64 |
| Harbor Maintenance Fee (0.125%) | $12.50 |
| Duty and fees | $47.14 |
Origin-specific tariffs can multiply this. Run this example from China or from Mexico to see every line.
Frequently asked questions
What is the duty rate for HTS 7219?
Heading 7219 has 14 rate lines. The general (MFN) duty rates are Free (14 lines). Products of free trade agreement partners may enter at the special rate, and Column 2 rates apply to countries without normal trade relations. Chapter 99 tariffs can be added on top: calculate the full amount.
Do Section 301, 232 or 201 tariffs apply to HTS 7219?
It depends on the 8- or 10-digit subheading, the country of origin, the entry date and, for Section 232, the metal content. These additional duties are listed in Chapter 99 of the HTS. The free duty calculator checks each program for a given code, origin and date and shows which apply and why.
What fees are added to an import under HTS 7219?
Formal entries pay the Merchandise Processing Fee of 0.3464% of value (minimum $34.58, maximum $670.86 in FY2027). Ocean shipments also pay the Harbor Maintenance Fee of 0.125% of value. See the import duty calculator for how they combine.