HTS heading 7220 · Chapter 72
HTS 7220: Flat-rolled products of stainless steel, of a width of…
HTS heading 7220 covers flat-rolled products of stainless steel, of a width of less than 600 mm. It has 10 tariff lines with a duty rate; the general (MFN) rates are Free (10 lines).
Imports may also owe Chapter 99 tariffs (Section 232, 301 or 201) depending on origin and date, plus the Merchandise Processing Fee and, by sea, the Harbor Maintenance Fee.
Rates from the 2026 HTS Revision 22, effective October 30, 2026. Source: U.S. International Trade Commission.
Tariff lines and duty rates
| HTS code | Description | General | Special | Column 2 | Estimate |
|---|---|---|---|---|---|
| Not further worked than hot-rolled: | |||||
| 7220.11.00.00 | Of a thickness of 4.75 mm or more[kg] | Free | 29% | Estimate → | |
| 7220.12 | Of a thickness of less than 4.75 mm: | ||||
| 7220.12.10.00 | Of a width of 300 mm or more[kg] | Free | 29% | Estimate → | |
| 7220.12.50.00 | Of a width of less than 300 mm[kg] | Free | 34% | Estimate → | |
| 7220.20 | Not further worked than cold-rolled (cold-reduced): | ||||
| 7220.20.10 | Of a width of 300 mm or more | Free | 29% | ||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel: | |||||
| 7220.20.10.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7220.20.10.15 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7220.20.10.60 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7220.20.10.80 | Other[kg] | Estimate → | |||
| Of a width of less than 300 mm: | |||||
| 7220.20.60 | Of a thickness exceeding 1.25 mm | Free | 34% | ||
| 7220.20.60.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7220.20.60.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7220.20.60.15 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7220.20.60.60 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7220.20.60.80 | Other[kg] | Estimate → | |||
| 7220.20.70 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | 34% | ||
| 7220.20.70.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Containing more than 0.5 percent by weight of nickel: | |||||
| 7220.20.70.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7220.20.70.15 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7220.20.70.60 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7220.20.70.80 | Other[kg] | Estimate → | |||
| Of a thickness not exceeding 0.25 mm: | |||||
| 7220.20.80.00 | Razor blade steel[kg] | Free | 34% | Estimate → | |
| 7220.20.90 | Other | Free | 34% | ||
| 7220.20.90.30 | Containing more than 0.5 percent but less than 24 percent by weight of nickel[kg] | Estimate → | |||
| 7220.20.90.60 | Other[kg] | Estimate → | |||
| 7220.90.00 | Other | Free | 46% | ||
| Containing more than 0.5 percent but less than 24 percent by weight of nickel: | |||||
| 7220.90.00.10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum[kg] | Estimate → | |||
| 7220.90.00.15 | Other[kg] | Estimate → | |||
| Other: | |||||
| 7220.90.00.60 | Containing less than 15 percent by weight of chromium[kg] | Estimate → | |||
| 7220.90.00.80 | Other[kg] | Estimate → | |||
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | Free | 11% | ||
| 7221.00.00.05 | Of high-nickel alloy steel[kg] | Estimate → | |||
| Other: | |||||
| Of circular cross section: | |||||
| With a diameter of less than 14 mm: | |||||
| 7221.00.00.17 | Containing less than 8 percent by weight of nickel[kg] | Estimate → | |||
| 7221.00.00.18 | Containing 8 percent or more but less than 24 percent by weight of nickel[kg] | Estimate → | |||
| 7221.00.00.30 | With a diameter of 14 mm or more but less than 19 mm[kg] | Estimate → | |||
| 7221.00.00.45 | With a diameter of 19 mm or more[kg] | Estimate → | |||
| 7221.00.00.75 | Other[kg] | Estimate → |
36 lines shown. Statistical suffixes (the last two digits) inherit the rate of the 8-digit subheading above them.
Example: base duty and fees on $10000
For HTS 7220.11.00.00 at the general rate of Free, shipped by ocean, before any Chapter 99 tariffs:
| Base duty (Free) | $0.00 |
| Merchandise Processing Fee (0.3464%, min $34.58) | $34.64 |
| Harbor Maintenance Fee (0.125%) | $12.50 |
| Duty and fees | $47.14 |
Origin-specific tariffs can multiply this. Run this example from China or from Mexico to see every line.
Frequently asked questions
What is the duty rate for HTS 7220?
Heading 7220 has 10 rate lines. The general (MFN) duty rates are Free (10 lines). Products of free trade agreement partners may enter at the special rate, and Column 2 rates apply to countries without normal trade relations. Chapter 99 tariffs can be added on top: calculate the full amount.
Do Section 301, 232 or 201 tariffs apply to HTS 7220?
It depends on the 8- or 10-digit subheading, the country of origin, the entry date and, for Section 232, the metal content. These additional duties are listed in Chapter 99 of the HTS. The free duty calculator checks each program for a given code, origin and date and shows which apply and why.
What fees are added to an import under HTS 7220?
Formal entries pay the Merchandise Processing Fee of 0.3464% of value (minimum $34.58, maximum $670.86 in FY2027). Ocean shipments also pay the Harbor Maintenance Fee of 0.125% of value. See the import duty calculator for how they combine.